Impact Attenuators in Utah

Impact attenuators across Utah, installed to MASH and UDOT standards and backed by a one-year performance warranty.

Request a Free Site Visit
Impact-Attenuators

The Cost of a Missing or Damaged Impact Attenuator in Utah

Gore points, bridge piers, and exit ramp noses are fixed hazards, and a missing or already-crashed-into impact attenuator leaves the next vehicle to hit that spot with nothing to absorb the impact.

Impact attenuators are designed to crush or redirect on the first hit, which means many units need full replacement, not just repair, after a crash. A damaged unit left in place on I-15, I-80, I-70, and US-89 is a liability UDOT inspectors flag quickly.

RoadGuard installs and replaces MASH-tested impact attenuators across Utah, matched to the design speed and geometry of the hazard being protected.

View Guiderail in Utah

Ideal Fencing impact attenuator highway crash cushion

Your Local RoadGuard Team in Utah

Ideal Fencing Corp (IFC) delivers roadside safety work directly across Utah. IFC is 100% employee-owned, with the crews, equipment, and material inventory it takes to keep a Utah project moving through UDOT inspection.

Need Impact Attenuators in Utah?

Request a Free Site Visit

\See Everything RoadGuard Installs

Explore All Solutions

Impact Attenuator Solutions in Utah

RoadGuard installs and replaces impact attenuators, also called crash cushions, at gore points, bridge piers, exit ramp noses, and other fixed hazards across Utah.

Redirective and Non-Redirective Systems

Redirective attenuators guide a vehicle back into its travel lane on an angled hit, while non-redirective systems are built for hazards where redirection isn't the goal. RoadGuard specifies the right type for each site.

Matched to Design Speed

Every MASH-tested attenuator is rated for a specific speed range. RoadGuard confirms the unit installed matches the posted or design speed of the roadway it's protecting.

Post-Impact Replacement

Most impact attenuators are designed to be sacrificial. RoadGuard provides fast replacement after a hit so the hazard isn't left unprotected any longer than necessary.

Impact attenuators are frequently installed alongside high-tension cable barrier and standard W-beam guiderail as part of a complete guiderail installation project.

How RoadGuard Delivers Impact Attenuators

Every RoadGuard project follows the same four-step process, from the first no-obligation site visit to a warranty-backed finished installation.

Step 1

Assessment

A qualified roadside safety professional performs a no-obligation site visit to document conditions, hazards, and DOT or authority requirements.

Step 2

Analysis

RoadGuard develops a fixed-cost proposal from the site visit data, including scope, materials, and schedule defined up front with no surprises.

Step 3

Installation

Crews mobilize quickly, in as little as 24 to 48 hours for emergency repairs, to install the system to specification while maintaining traffic control and safety throughout the work zone.

Warranty

Every installation is backed by a one-year performance warranty covering materials, installation workmanship, and overall system performance.

Warranty

Every installation is backed by a one-year performance warranty covering materials, installation workmanship, and overall system performance.

Guardrail end terminal with yellow and black striped end panel on highway shoulder

Why Utah Chooses RoadGuard

Ideal Fencing Corp brings direct knowledge of Utah Department of Transportation (UDOT) approved products and permitting steps to every Utah project. IFC is 100% employee-owned, with OSHA 30-Hour certified crews.

IFC carries $25 million-plus in bonding capacity, $5 million in general liability coverage, DBE certification, and ATSSA membership, the documentation UDOT, general contractors, and municipal procurement teams typically require before award.

Every project starts with a free, no-obligation site visit and a fixed-cost proposal, and finishes with a one-year warranty covering materials, installation, and performance.

Request a Free Site Visit

Get Your Free Impact Attenuators Site Visit

Request a free, no-obligation site visit from your local RoadGuard team. We'll assess conditions and develop a fixed-cost proposal.

Call (877) 839-0155

    How Can We Help?

    • Personal Info
    • Contact Info
    • Project Info

    How Can We Help?

    • Personal Info
    • Contact Info
    • Project Info

    How Can We Help?

    • Personal Info
    • Contact Info
    • Project Info

    By using this website, you acknowledge and agree to our Privacy Policy. This site is protected by reCAPTCHA, and the Google Privacy Policy and Terms of Service apply.